paltronix.com

Welcome to Paltronix: Embedded Development Products

Navigation Menu

LAP-16032U Logic Analyser

Posted by in 16-Channel Logic Analysers, Logic Analysers

Ordering Information

Order Code: LAP-16032U
Manufacturer: Zeroplus
Price: £99.00

Features

  • 16 logic analyser channels.
  • Sampling rates up to 100MHz.
  • 64Kbits per channel memory depth (through the use of compression this can be increased to a maximum of 16Mbits).
  • I2C, SPI, UART and 7-segment display protocol decoding as standard.
  • Two free protocol decoding options of your choice from those listed below. After ordering, just telephone or email us with your choices.
  • Extensive range of further protocol decoding options available. Allow for your two free protocol decoding options and then order any that are also required, either with your logic analyser or at a later date.
  • Powered from PC’s USB port.
  • Lightweight, compact and extremely portable.
  • Supplied with USB cable, test leads and sprung-loaded test clips.

Overview

Not long ago a logic analyser represented a considerable investment for most electronics companies and their cost put them beyond the reach of hobbyists. Even with the advent of PC-based logic analysers, they could still cost upwards of several hundred pounds. Now all this changes with this high-quality 16-channel 100MHz logic analyser priced at under £100.

The LAP-16032U is an incredibly easy to set up and use 16-channel logic analyser. Extremely compact and lightweight, the LAP-16032U connects to and is powered by the USB port of any desktop or laptop PC making it very portable and ideal for use in the field. The LAP-16032U provides sampling rates up to 100MHz and 32Kbits memory depth per channel. Furthermore Zeroplus’s patented compression techniques allow up to 8Mbits memory depth per channel. Additional features include I2C, SPI, UART and 7-segment display protocol decoding and output connections allowing synchronisation with other test equipment such as.

Specifications

Sampling Rates
Internal clock (timing mode): 100Hz – 100MHz
External clock (state mode): 100MHz

Threshold Voltages
Working range: -6 ~ +6V
Accuracy: ±0.1V
Maximum input voltage: ±30V
Impedance: 500kΩ/10pF

Memory
Total memory: 1Mbits
Depth per channel: 32Kbits (up to 8Mbits with compression)

Trigger
Condition: pattern/edge
Trigger channel: 16 channels
Pre/post trigger: yes
Trigger level: 1 level
Trigger count: 1 ~ 65535

Software Functions
Time base range: 5ps ~ 10Ms
Vertical sizing: 1 ~ 5.5
Enable delay: yes
Data compression: 16Mbits maximum
Width display: yes
Maximum trigger page: 128 ~ 8192 pages
Trigger delay: yes
Infinite increase spacer bar: yes
Automatic zoom in of spacer bar: yes
Automatic software upgrade: yes
Data range selectable: yes
Statistics: yes
Bus inquiry and counter: yes
Enable bar: yes
Bus analyser module plug-in: yes
Bus package list: yes

Power Supply
Power: from USB
Power at rest: 1W
Power at work: 2W

Protocol Decoding Options for LAP-16032U

Enhance your LAP-16032U by adding additional protocol decoding options. Any of those listed below can be bought separately to complement the I2C, SPI, UART and 7-segment display decoding features provided as standard. These comprise software and upgrade codes and so may be ordered whenever required and not just when ordering a logic analyser. Don’t forget that you can request any two of these free of charge with your LAP-16032U.

See also:

A low-cost 16-channel logic analyser with sampling rates up to 200MHz, 128Kbits memory per channel and in-built I2C, SPI and UART serial bus protocol decoding.
Read More

LAP-16128U Logic Analyser

Posted by in 16-Channel Logic Analysers, Logic Analysers

Ordering Information

Order Code: LAP-16128U
Manufacturer: ZeroPlus
Price: £249.00

Features

  • 16 logic analyser channels.
  • Sampling rates up to 200MHz.
  • 128Kbits per channel memory depth (through the use of compression this can be increased to a maximum of 32Mbits).
  • I2C, SPI, UART and 7-segment display protocol decoding as standard.
  • Two free protocol decoding options of your choice from those listed below. After ordering, just telephone or email us with your choices.
  • Extensive range of further protocol decoding options available. Allow for your two free protocol decoding options and then order any that are also required, either with your logic analyser or at a later date.
  • Powered from PC’s USB port.
  • Lightweight, compact and extremely portable.
  • Supplied with USB cable, test leads and sprung-loaded test clips and high-quality carry bag.

Overview

The LAP-16128U is an incredibly easy to set up and use 16-channel logic analyser. Extremely compact and lightweight, the LAP-16128U connects to and is powered by the USB port of any desktop or laptop PC making it very portable and ideal for use in the field. The LAP-16128U provides sampling rates up to 200MHz and 128Kbits memory depth per channel. Furthermore ZeroPlus’s patented compression techniques allow up to 32Mbits memory depth per channel. Additional features include I2C, SPI, UART and 7-segment display protocol decoding and output connections allowing synchronisation with other test equipment such as.

Specifications

Sampling Rates
Internal clock (timing mode): 100Hz – 200MHz
External clock (state mode): 100MHz

Threshold Voltages
Working range: -6 ~ +6V
Accuracy: ±0.1V
Maximum input voltage: ±30V
Impedance: 500kΩ/10pF

Memory
Total memory: 4Mbits
Depth per channel: 128Kbits (up to 32Mbits with compression)

Trigger
Condition: pattern/edge
Trigger channel: 16 channels
Pre/post trigger: yes
Trigger level: 1 level
Trigger count: 1 ~ 65535

Software Functions
Time base range: 5ps ~ 10Ms
Vertical sizing: 1 ~ 5.5
Enable delay: yes
Data compression: 32Mbits maximum
Width display: yes
Maximum trigger page: 128 ~ 8192 pages
Trigger delay: yes
Infinite increase spacer bar: yes
Automatic zoom in of spacer bar: yes
Automatic software upgrade: yes
Data range selectable: yes
Statistics: yes
Bus inquiry and counter: yes
Enable bar: yes
Bus analyser module plug-in: yes
Bus package list: yes

Power Supply
Power: from USB
Power at rest: 1W
Power at work: 2W

Protocol Decoding Options for LAP-16128U

Enhance your LAP-16128U by adding additional protocol decoding options. Any of those listed below can be bought separately to complement the I2C, SPI, UART and 7-segment display decoding features provided as standard. These comprise software and upgrade codes and so may be ordered whenever required and not just when ordering a logic analyser. Don’t forget that you can request any two of these free of charge with your LAP-16128U.

Special offer on protocol decoding options – order any protocol for £45, any three or more protocols for just £35 each, or any five or more protocols for only £25 each! Simply purchase required protocols when ordering via local store or phone.

1-Wire Decoding Option
1-wire protocol decoding option for LAP series logic analysers.
Order Code: LAP-1WIRE
Manufacturer: Zeroplus
Price: £75.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
CAN 2.0B Decoding Option
CAN 2.0B protocol decoding option for LAP series logic analysers.
Order Code: LAP-CAN20B
Manufacturer: Zeroplus
Price: £195.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
CCIR656 Decoding Option
CCIR656 protocol decoding option for LAP series logic analysers.
Order Code: LAP-CCIR656
Manufacturer: Zeroplus
Price: £135.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
DIGRF Decoding Option
DIGRF protocol decoding option for LAP series (LAP-16128U, LAP-32128U-A, LAP-321000U-A and LAP-322000U-A only).
Order Code: LAP-DIGRF
Manufacturer: Zeroplus
Price: £135.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
DMX-512 Decoding Option
DMX-512 protocol decoding option for LAP series logic analysers.
Order Code: LAP-DMX512
Manufacturer: Zeroplus
Price: £105.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
DSA Decoding Option
DSA protocol decoding option for LAP series logic analysers.
Order Code: LAP-DSA
Manufacturer: Zeroplus
Price: £75.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
FlexRay 2.1A Decoding Option
FlexRay 2.1A protocol decoding option for LAP series logic analysers.
Order Code: LAP-FLEXRAY21A
Manufacturer: Zeroplus
Price: £195.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
HDQ Decoding Option
HDQ protocol decoding option for LAP series logic analysers.
Order Code: LAP-HDQ
Manufacturer: Zeroplus
Price: £105.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
IrDA Decoding Option
IrDA protocol decoding option for LAP series (LAP-16128U, LAP-32128U-A, LAP-321000U-A and LAP-322000U-A only).
Order Code: LAP-IRDA
Manufacturer: Zeroplus
Price: £135.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
JTAG 2.0 Decoding Option
JTAG 2.0 protocol decoding option for LAP series logic analysers.
Order Code: LAP-JTAG20
Manufacturer: Zeroplus
Price: £135.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
LPC-SERIRQ Decoding Option
LPC-SERIRQ protocol decoding option for LAP series (LAP-16128U, LAP-32128U-A, LAP-321000U-A and LAP-322000U-A only).
Order Code: LAP-LPCSERIRQ
Manufacturer: Zeroplus
Price: £135.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
Microwire Decoding Option
Microwire protocol decoding option for LAP series logic analysers.
Order Code: LAP-MICROWIRE
Manufacturer: Zeroplus
Price: £75.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
Modbus Decoding Option
Modbus protocol decoding option for LAP series logic analysers.
Order Code: LAP-MODBUS
Manufacturer: Zeroplus
Price: £195.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
Signia 6210 Decoding Option
Signia 6210 protocol decoding option for LAP series logic analysers.
Order Code: LAP-SIGNIA6210
Manufacturer: Zeroplus
Price: £305.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each
USB 1.1 Decoding Option
USB 1.1 protocol decoding option for LAP series logic analysers.
Order Code: LAP-USB11
Manufacturer: Zeroplus
Price: £225.00
Special offer!
Any 1+ protocol: £45
Any 3+ protocols: £35 each
Any 5+ protocols: £25 each

See also:

A great value 32-channel logic analyser with sampling rates up to 200MHz, 64Kbits memory per channel and in-built 1-wire, I2C, Manchester, Microwire, Miler, SSI, SPI and UART serial bus protocol decoding.
Read More

LAP-321000U-A Logic Analyser

Posted by in 32-Channel Logic Analysers, Logic Analysers

Ordering Information

Order Code: LAP-321000U-A
Manufacturer: ZeroPlus
Availability: In stock
Price: £799.00

Overview

The LAP-321000U-A is an advanced 32-channel logic analyser. Extremely compact and lightweight, the LAP-321000U-A connects to and is powered by the USB port of any desktop or laptop PC making it very portable and ideal for use in the field. The LAP-321000U-A provides sampling rates up to 200MHz and 1Mbits memory depth per channel. Furthermore ZeroPlus’s patented compression techniques allow up to 255Mbits memory depth per channel. Additional features include advanced protocol decoding for 1-wire, CAN, HDQ, I2C, LIN, Manchester, Microwire, Miler, PS/2, SPI, SSI, UART, USB1.1 and 7-segment displays as well as output connections allowing synchronisation with other test equipment such as oscilloscopes.

Features

  • 32 logic analyser channels.
  • Sampling rates up to 200MHz.
  • 1-wire, CAN, HDQ, I2C, LIN, PS/2, SPI, SSI, Manchester, Microwire, Miler, UART, USB1.1 and 7-segment display serial bus protocol decoding as standard.
  • 1Mbits per channel memory depth (through the use of compression this can be increased to a maximum of 255Mbits).
  • Powered from PC’s USB port.
  • Lightweight, compact and extremely portable.

Specifications

Sampling Rates
Internal clock (timing mode): 100Hz – 200MHz
External clock (state mode): 100MHz

Threshold Voltages
Working range: -6 ~ +6V
Accuracy: ±0.1V
Maximum input voltage: ±30V
Impedance: 500kΩ/10pF

Memory
Total memory: 32Mbits
Depth per channel: 1Mbits (up to 255Mbits with compression)

Trigger
Condition: pattern/edge
Trigger channel: 16 channels
Pre/post trigger: yes
Trigger level: 1 level
Trigger count: 1 ~ 65535

Software Functions
Time base range: 5ps ~ 10Ms
Vertical sizing: 1 ~ 5.5
Enable delay: yes
Data compression: 32Mbits maximum
Width display: yes
Maximum trigger page: 128 ~ 8192 pages
Trigger delay: yes
Infinite increase spacer bar: yes
Automatic zoom in of spacer bar: yes
Automatic software upgrade: yes
Data range selectable: yes
Statistics: yes
Bus inquiry and counter: yes
Enable bar: yes
Bus analyser module plug-in: yes
Bus package list: yes

Power Supply
Power: from USB
Power at rest: 1W
Power at work: 2W

See also:

A great value 32-channel logic analyser with sampling rates up to 200MHz, 64Kbits memory per channel and in-built 1-wire, I2C, Manchester, Microwire, Miler, SSI, SPI and UART serial bus protocol decoding.
Read More

LAP-32128U-A Logic Analyser

Posted by in 32-Channel Logic Analysers, Logic Analysers

Ordering Information

Order Code: LAP-32128U-A
Manufacturer: ZeroPlus
Availability: In stock
Price: £499.00

Overview

The LAP-32128U-A is an incredibly easy to set up and use 32-channel logic analyser. Extremely compact and lightweight, the LAP-32128U-A connects to and is powered by the USB port of any desktop or laptop PC making it very portable and ideal for use in the field. The LAP-32128U-A provides sampling rates up to 200MHz and 128Kbits memory depth per channel. Furthermore ZeroPlus’s patented compression techniques allow up to 32Mbits memory depth per channel. Additional features include advanced protocol decoding for 1-wire, I2C, Manchester, Microwire, Miler, SPI, SSI, UART and 7-segment displays as well as output connections allowing synchronisation with other test equipment such as oscilloscopes.

Features

  • 32 logic analyser channels.
  • Sampling rates up to 200MHz.
  • 1-wire, I2C, Manchester, Microwire, Miler, SSI, SPI, UART and 7-segment display protocol decoding as standard.
  • Further protocol decoding options available including USB1.1, PS/2, CAN and LIN.
  • 128Kbits per channel memory depth (through the use of compression this can be increased to a maximum of 32Mbits).
  • Powered from PC’s USB port.
  • Lightweight, compact and extremely portable.

Specifications

Sampling Rates
Internal clock (timing mode): 100Hz – 200MHz
External clock (state mode): 100MHz

Threshold Voltages
Working range: -6 ~ +6V
Accuracy: ±0.1V
Maximum input voltage: ±30V
Impedance: 500kΩ/10pF

Memory
Total memory: 4Mbits
Depth per channel: 128Kbits (up to 32Mbits with compression)

Trigger
Condition: pattern/edge
Trigger channel: 16 channels
Pre/post trigger: yes
Trigger level: 1 level
Trigger count: 1 ~ 65535

Software Functions
Time base range: 5ps ~ 10Ms
Vertical sizing: 1 ~ 5.5
Enable delay: yes
Data compression: 32Mbits maximum
Width display: yes
Maximum trigger page: 128 ~ 8192 pages
Trigger delay: yes
Infinite increase spacer bar: yes
Automatic zoom in of spacer bar: yes
Automatic software upgrade: yes
Data range selectable: yes
Statistics: yes
Bus inquiry and counter: yes
Enable bar: yes
Bus analyser module plug-in: yes
Bus package list: yes

Power Supply
Power: from USB
Power at rest: 1W
Power at work: 2W

See also:

A great value 32-channel logic analyser with sampling rates up to 200MHz, 64Kbits memory per channel and in-built 1-wire, I2C, Manchester, Microwire, Miler, SSI, SPI and UART serial bus protocol decoding.

 

Read More