We decided to write a separate post on how to build your own computer. As this is an embedded development website, including as much information about all fields of computing is important. We at Paltronix hope you find this piece informative and come visit us at our local shop to purchase development products!
To begin building your own computer, you will need to gather the right components. There are build guides available online which offer component lists for a variety of “build your own” computers. We recommend choosing a build guide, such as this popular list to find a gaming PC under $500. and then shopping around online (or in your own community) in order to gather high-quality components for great prices. Once you have your supplies, you’ll be ready to get the job done!
We recommend clearing a flat surface, such as a larger desk or kitchen table, which gives you ample room for boxes and parts. Before you unbox your components, you should should be aware of one risk. It’s static electricity. There is a way to avoid the risk, and this is purchasing a wristband which is anti-static. When you wear it, you’ll be grounded at all times. We think that everyone who builds their own computers should invest in these wristbands.
Also, you should choose footwear that has rubber soles. Another tip on avoiding static electricity is to work on your computer build in a room that has non-carpet flooring. Rugs stir up a lot of static electricity. When you do open boxes that contain your components, you’ll notice that most of them come in bags with anti-static properties. Keep them in these bags until you need them.
Open Your Case First
Getting the case ready is probably the simplest part of building a new computer. Put the case on your flat surface and take away its side panel. This panel’s removal will allow you to get into the case. Usually, the panel is located on the left-hand side. In addition, you should take away things that are hanging inside of the case. If something is affixed to the case, on the inside, move it out of the way.
Now, you’ll need to put your power supply into the case. It’s known as PSU for short. This component is usually situated on the back of a case, in an uppermost corner or on the bottom. You should see a slot with a square shape. This is the slot for the power supply. The slot will feature screw holes on two or more corners and the power supply unit will rest inside of it, with its female socket and switch facing in an outward direction. If you need more help, look at the manual which came with your case. It should show you exactly where the PSU needs to go.
After you take care of this, it will be time to install the computer’s processor. This is a more complex operation. However, plenty of people do it themselves and you can, too. Be sure to read lots of tips on installing a computer processor before you begin. This guide by Super Micro should help. When you educate yourself, you’ll have more confidence. You’ll know exactly what to do and what not to do!
Start Building a Computer Today
The Internet makes it so easy to find great components for fair prices. Also, it’s loaded with instructions on which components to buy and how to build a computer, step by careful step. So, why not start building a computer today?Read More